|
|
|
BERG DUCTING HOSE 6003
|
|
Hose primarily designed for use in garage workshops for the extraction of exhaust fumes. Can be used on the floor as this hose is crush recoverable. Has an external abrasion resistant wearstrip.
|
|
|
|
|
|
BERG DUCTING HOSE 6450
|
|
Range of large to very large bore ducting hoses. Diameters are produced up to 1200mm bore with different wire pitch distances.
|
|
|
|
|
|
BERG DUCTING HOSE 6500
|
|
Durable and very flexible thermoplastic elastomer hose with a high degree of flexibility. Good resistance to oils, greases and solvents. Standard wall thickness is 0.4mm.
|
|
|
|
|
|
BERG DUCTING HOSE 6501
|
|
This ducting hose is designed for use in under bonnet applications where high ambient temperatures exist. Made from a TPR material over a sprung helix, the hose offers resistance to oils and heat.
Very flexible and abrasion resistant.
|
|
|
|
|
|
BORA 4000
|
|
Medium duty polyester/polyurethane hose supported by a single, fully encapsulated blue or plain wire helix. This hose is designed for the transfer of small abrasive particles such as grit, powders, wood chip and other such abrasive materials.
|
|
|
|
|
|
BORA 8000
|
|
Super heavyweight abrasion resistant polyurethane ducting hose giving superb performance for transferring granules, particles, etc. Especially suited
for arduous use in agriculture and vehicle blowers discharge. Difficult to pierce or snag.
|
|
|
|
|
|
BORA 8500
|
|
Made from a heavy wall polyurethane over a semi-sprung wire helix, this hose is used in heavy and abrasive conditions, Designed for coarse grit and wood chip and other very abrasive materials.
|
|
|
|
|
|
BORA 8600
|
|
Tough yet lightweight PU ducting hose with a very smooth bore and good flexibility. This hose offers good crush resistance and is ideal for the conveyance of abrasive materials.
|
|
|
|
|
|
BORA 8750
|
|
A new type of ducting hose specially designed for vacuuming leaves, twigs, pine needles and similar debris. This hose will not be attacked by the microbes found in leaf litter unlike other PU hoses. Not affected by hydrolysis.
|
|
|
|
|
|
FOHN 700
|
|
Robust, vacuum lifting hose with resistance to oils, greases, solvents and industrial chemicals.
|
|
|
|
|
|
FOHN 701
|
|
Robust style of ducting hose capable of absorbing extremely high temperatures. Made from a series of silica glass jackets over a high
tensile wire helix. Sewn with a stainless thread.
|
|
|
|
|
|
HARMATTAN 6100
|
|
Single ply, spirally wound neoprene coated fabric with an internal spring wire helix and external neoprene coated cord. Designed for the conveyance of hot and cold particles at low pressure. very flexible and lightweight.
|
|
|
|
|
|
HARMATTAN 6200
|
|
Neoprene impregnated canvas ducting hose over a sprung wire helix. A cotton textile yarn is applied to the cover and gives very good flexibility. Used in vehicle air ducts, fumes or light non abrasive powders.
|
|
|
|
|
|
HARMATTAN 9500
|
|
Highly flexible PVC hose used on vacuum cleaners. Can be used on a variety of applications and has an attractive cosmetic finish.
|
|
|
|
|
|
HURRICANE DUCTING HOSE 1000
|
|
A high quality flexible ducting hose made using a double ply PVC wall fully encapsulating a sprung steel wire helix.
|
|
|
|
|
|
HURRICANE DUCTING HOSE 7000
|
|
General PVC ducting hose supported by a wire helix. Single ply ducting hose suitable for fumes, air and dust at low pressures. Used as a demisting hose in the automotive industry.
|
|
|
|
|
|
HURRICANE DUCTING HOSE 7500
|
|
PVC suction hose for air, grains, powders, dust. Can be manufactured antistatic upon request.
This ducting hose is made in black or grey colour. Smooth bore allows good rate of product flow and is highly flexible.
|
|
|
|
|
|
HURRICANE DUCTING HOSE 9000
|
|
Medium duty PVC dust extraction hose. Made with a close pitch sprung helix that therefore makes this hose a very flexible product. Suitable for most air, fume and dust extraction applications.
|
|
|
|
|
|
KHAMSIN 5000
|
|
Lightweight ducting hose used mainly as a flexible connection between grilles, diffusers, fans etc.
Very flexible and lightweight.
|
|
|
|
|
|
SHAMAL 3001
|
|
Lightweight ducting hose constructed from a wire helix and covered with a single layer of silicone coated glass fabric. Reinforced with a
single fibre glass retention cord.
|
|
|
|
|
|
SHAMAL 3002
|
|
Double ply version of Shamal 3001 and is used where a stronger hose is required. Has excellent heat ageing characteristics and low temperature flexibility.
|
|
