OROFLEX  30S

High pressure Polyurethane hose for fuel bunkering applications. Made from a polyester jacket with PU materials, this hose is designed for transfer of hydrocarbons. Very tough and rugged Oroflex 30S will give many years service in tough environments.
 
Click to enlarge - High pressure Polyurethane hose for fuel bunkering applications. Made from a polyester jacket with PU materials, this hose is designed for transfer of hydrocarbons. Very tough and rugged Oroflex 30S will give many years service in tough environments.
Click image to enlarge
Colour
Blue, black or NATO green
Cover
High grade polyurethane
Lining
High grade polyurethane
Reinforcement
Circular woven textile high tenacity polyester
Specification
Anti static property is achieved by using 4 polyester sheathed copper wires of 0.5mm section.
Remarks
Resistance not to exceed 70,000 Ohms/ft
Can be made in up to 200 metre lengths
Application
Unlike steel pipes, Oroflex 30S™ is unaffected by corrosion and scaling.
Special Features
Maximum expansion < 10%
Maximum elongation 0-2%
Ozone tested at 96 hours at 40C under 100 pphm ozone.
Temperature
-40°C - +50°C
[Intermittant use permitted to +80°C
Diameter    Working Pressure  Burst Pressure  Weight  Wall  Tensile  Bend Radius  
Inch  mm  Kg/cm2  Kg/cm2  g/metre  mm  Kg  metres  
               
4"  102  10  36  1200  3.00  3100  1.60  
6"  152  10  36  1800  3.50  4600  1.80  
               
               

Back to previous page

All products in category: Oroflex ™
OROFLEX  10
Oroflex™ high pressure layflat hose. Reliable and robust yet lightweight and flexible. A superior hose used where ordinary PVC hoses tend to fail. Oroflex 10™ is used in irrigation, sewage and general pumping duties worldwide.
OROFLEX  20
Premium quality, high pressure layflat hose for compressed air/irrigation and sludge injection applications. Special variant used by contractors for sludge/slurry injection or surface spreading.

OROFLEX  20-AS
High pressure, anti-static layflat hose designed for the transfer of hydro carbons (up to 40% aromatics). Used in Bunkering/Transfer applications. Very good UV resistance and available in up to 200 metre lengths
OROFLEX  20-S
High pressure and high tensile layflat hose designed for use on land based drilling rigs as a water supply hose. This hose has been designed to handle severe terrain and operate in rugged conditions. Oroflex 20-S has a high UV resistant.

OROFLEX  30
High pressure layflat hose for use with potable water. Also used as a drag hose in sludge to land recycling. This hose is used where the risk of abrasion is high.
OROFLEX  30S
High pressure Polyurethane hose for fuel bunkering applications. Made from a polyester jacket with PU materials, this hose is designed for transfer of hydrocarbons. Very tough and rugged Oroflex 30S will give many years service in tough environments.

OROFLEX  6
Layflat hose designed for use as header pipes in agriculture. Lightweight yet will cope with rough handling. Solid wall construction thereby virtually eliminating the possibility of delamination. Can be used with T tape connectors.
OROFLEX  70
Medium duty uncovered layflat hose. Has a PVC liner with a textile cover. Lightweight yet able to withstand quite high pressures. Hose should be protected from external abuse.

OROFLEX  80
Premium quality layflat hose for linear travelling irrigation reels. Resistant to vermin and mildew attack. Also used as a heavy duty dredging hose.
OROFLEX  Coupling
These stainless steel couplings have been specially designed to fit with Oroflex 40 and Oroflex 60. Machined from high grade stainless steel, these couplings will give a long service life and are fully warranted for use with Oroflex hoses.

OROFLEX  Flowstream
Flexible well riser hose used in place of PVC or steel tube. Allows greatly improved access to pump for repair, refurbishment etc. Used with permanent stainless steel couplings that are fixed to the hose by means of an expansion ring.
OROFLEX  Flowstream Pro
This hose is designed for use as a flexible well riser. Very strong and dependable, this hose is made from a double jacket construction and is available with a wide range of couplings and accessories.

OROFLEX  Titan
An extra heavy duty layflat hose for the most demanding applications. This is a double jacketed hose and incorporates copper earthing wires for safe dissipation of electrical currents. The hose liner is smooth and gives very low friction losses.

Back to previous page